Characteristics of Liquid Glass:

• Mixing ratio: 1:1 (component A to B).
• Working time: about 15-20 minutes.
• Demolding time: usually 1-2 hours.
• Full curing: achieved after 3 days.

Box contents: Component A (150 ml), Component B (150 ml), a pair of gloves, mixing stick, measuring cup, instructions.

Preparation:

• Select a well-ventilated area.
• Use a horizontal surface covered with plastic.
• Wear gloves.
• Measuring and mixing: Mix Component B well before adding it to A. Mix in a 1:1 ratio.
• Stir slowly for about two minutes until homogenized.
• Casting: Clean the mold with alcohol. Pour the resin slowly into the molds.
• For objects thicker than 1 cm, pour in layers.
• Reaction process: The resin generates heat during curing. The thicker the layer, the more heat is produced.
• Curing and drying: Allow the resin to harden at room temperature. Thin layers (<1 cm) may remain flexible.
• Significant hardness in 24 hours, fully hardened in 3 days.
• Coloring (optional): Use 1-2 ml of pigment per 100 ml of resin.
• Tool cleaning: Clean tools immediately with alcohol and absorbent paper.