Skroutz.gr

DDT Single-phase Water Pump 1.46hp
Submersible Water Pumps

DDT Single-phase Water Pump 1.46hp

The DDT 3QGD submersible water pump, 1.1kW, features unique characteristics with a diameter of 7.5 cm and can be used in wells with an 8 cm diameter pipe. This clean water pump has 10 impellers and a...

The DDT 3QGD submersible water pump, 1.1kW, features unique characteristics with a diameter of 7.5 cm and can be used in wells with an 8 cm diameter pipe. This clean water pump has 10 impellers and a steel construction, making it practical, durable, and resistant to heavy use and corrosion. The DDT 3QGD pump is recommended for pumping water from medium...

See full description See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    120

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
144 13 €
145 Coins 145 Coins
Delivery Wed, 30 Sep - Tue, 06 Oct
Free   shipping cost
Sent from Romania
From Dawer 4.2 (4)
4.2 (4 reviews)
Romania
20+ pieces
See Water Pumps on the page of Dawer
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

The DDT 3QGD submersible water pump, 1.1kW, features unique characteristics with a diameter of 7.5 cm and can be used in wells with an 8 cm diameter pipe. This clean water pump has 10 impellers and a steel construction, making it practical, durable, and resistant to heavy use and corrosion. The DDT 3QGD pump is recommended for pumping water from medium depths, suitable for any activity involving water extraction from wells and boreholes.

  • Maximum Flow Capacity: 5 m³/h
  • Vertical Discharge Height: 120 m
  • Suction Depth: 120 m
  • Diameter: 75 mm
  • Cable Length: 10 m
  • Pump Type: Submersible pump
  • Material: Steel
  • Power Capacity: 1100 W
  • Protection Class: ICL B
  • Maximum Temperature: 35°C
  • Discharge Connection Diameter: 1 inch
  • Suction Connection Diameter: 1 inch
  • Weight: 7 kg
  • Power Supply: Single-phase
  • Starting Type: Automatic

The pump features an electronic automatic pressure switch DDT LS-4 with the following features:

  • Special non-return valve to prevent leaks
  • Safety system to prevent operation without water
  • Pressure indicator
  • Manual start button (RESET)
  • Power indicator LED
  • Operational indicator LED (ON)
  • Safety system indicator LED (FAILURE)

Technical Specifications:

  • Voltage: 220-240V
  • Maximum Current: 10(6) A
  • Frequency: 50/60 Hz
  • Moisture Protection: IP65
  • Maximum Water Temperature: 60°C
  • Start Pressure: 1.5-3 bar
  • Maximum Operating Pressure: 10 bar

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.46 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1095 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m
Motor Rotation Speed
2860 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
120 m

Maximum Head Height: 120


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
5 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
10 m
Maximum Particle Size
75 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IP65

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

The DDT 3QGD submersible water pump, 1.1kW, features unique characteristics with a diameter of 7.5 cm and can be used in wells with an 8 cm diameter pipe. This clean water pump has 10 impellers and a steel construction, making it practical, durable, and resistant to heavy use and corrosion. The DDT 3QGD pump is recommended for pumping water from medium depths, suitable for any activity involving water extraction from wells and boreholes.

  • Maximum Flow Capacity: 5 m³/h
  • Vertical Discharge Height: 120 m
  • Suction Depth: 120 m
  • Diameter: 75 mm
  • Cable Length: 10 m
  • Pump Type: Submersible pump
  • Material: Steel
  • Power Capacity: 1100 W
  • Protection Class: ICL B
  • Maximum Temperature: 35°C
  • Discharge Connection Diameter: 1 inch
  • Suction Connection Diameter: 1 inch
  • Weight: 7 kg
  • Power Supply: Single-phase
  • Starting Type: Automatic

The pump features an electronic automatic pressure switch DDT LS-4 with the following features:

  • Special non-return valve to prevent leaks
  • Safety system to prevent operation without water
  • Pressure indicator
  • Manual start button (RESET)
  • Power indicator LED
  • Operational indicator LED (ON)
  • Safety system indicator LED (FAILURE)

Technical Specifications:

  • Voltage: 220-240V
  • Maximum Current: 10(6) A
  • Frequency: 50/60 Hz
  • Moisture Protection: IP65
  • Maximum Water Temperature: 60°C
  • Start Pressure: 1.5-3 bar
  • Maximum Operating Pressure: 10 bar

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.46 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1095 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m
Motor Rotation Speed
2860 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
120 m

Maximum Head Height: 120


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
5 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
10 m
Maximum Particle Size
75 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IP65

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

144,13 €
Free   shipping cost