Sunlu PLA+ Filament (Black)

The Sunlu PLA+ filament is a selected material for 3D printing, combining an aesthetic finish and durability. It stands out for its mechanical properties, with impact resistance up to 8 kJ/m², making it more resistant to wear compared to typical PLA and PLA+ filaments.

Main Features:

• Diameter: 1.75 mm
• High dimensional accuracy: ±0.02 mm
• Low shrinkage and good layer adhesion
• Designed to minimize printing issues

The careful winding of the filament reduces the risk of knots and tangles during use. The filament is compatible with almost all 3D FDM printers that support 1.75 mm filament.

Recommended Printing Settings:

• Speed: 50–100 mm/s at a temperature of 195–205 °C
• Speed: 100–300 mm/s at a temperature of 205–220 °C

The filament composition helps achieve reliable results in a variety of applications.

Technical Specifications:

• Manufacturer: Sunlu
• Model: PLA+ B
• Density: 1.23 g/cm³
• Vicat softening temperature: 54 °C
• Heat deflection temperature (HDT): 53 °C
• Melting temperature: 164 °C
• Melt flow rate: 6.3 g/10 min
• Tensile strength: 64 MPa
• Elongation at break: 17 %
• Flexural strength: 86 MPa
• Elastic modulus: 2907 MPa
• IZOD impact resistance (X-Y): 3.5 kJ/m²