Sigmafast 20 Anti-Corrosive Rust Paint 20L - RAL 1028

Suitable for painting defective (rusted) steel surfaces. A minimum film thickness of 150 microns (2-3 coats) is required for full protection of the painted surface. It is used and recommended by professionals in the field of anti-corrosive protection. Ideal for protecting workshops.

Main Advantages of the Paint:

• Excellent adhesion even on rusted surfaces
• High resistance to corrosion and water penetration
• Suitable for protecting weld seams
• Can be recoated with most alkyd, chlorinated rubber, vinyl, epoxy, polyurethane, and automotive paints

Technical Data:

• Tack-free time: 15 minutes
• Second coat application at 20°C: After 45 minutes
• Solid content: 55%
• Recommended film thickness: 50-80 μm
• Coverage rate at 50 μm: 11 m²/L
• Finish: Matt
• Recommended thinner: Sigma 21-06 or Solid Thinner 06

For long-lasting protection over the years, the surface must be sanded, washed, and degreased with Solid Cleaner 05 before painting.

Use of ABE1P3 filter mask is recommended.