Sigmafast 20 Anti-Corrosive Paint for Cracks 20L - RAL 9003
Quality Tested at Sea
Suitable for painting defective (rusty) steel surfaces.
A minimum film thickness of 150 microns (2-3 coats) is required for full protection of the painted surface.
Used and recommended by professionals in the field of anti-corrosion. Ideal for protecting workshops.
Main Advantages of the Paint:
- Excellent adhesion even on rust
- High resistance to corrosion and water ingress
- Suitable for the protection of welded joints
- Can be recoated with most alkyd, chlorinated rubber, vinyl, epoxy, polyurethane and automotive paints
Technical Data:
- Touch dry: 15 minutes
- Application of second coat at 20°C: After 45 minutes
- Solid content: 55%
- Recommended film thickness: 50-80 μm
- Coverage at 50 μm: 11 m²/L
- Gloss: Matt
- Recommended thinner: Sigma 21-06 or Solid Thinner 06
For long-lasting protection, the surface must be sanded, washed, and degreased with Solid Cleaner 05 before painting.
Specifications
- Type
- Anti-Corrosion Paint
- Colour
- White
- Acrilyc
- No
- Luminosity
- Matt
Quantity
- Volume
- 20 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.