Cekol Q1 Uni Universal Tile Adhesive 5 kg
The construction adhesive Cekol Q1 Uni is a multifunctional tile adhesive that enables thin bonding of ceramic tiles to concrete, brick, cement, and cement-lime plasters. It can also be used for bonding blocks and bricks with a thin joint.
The adhesive is frost-resistant, waterproof, and environmentally friendly, suitable for both indoor and outdoor use. Additionally, it is adapted for substrate leveling.
-
Frost and water resistant for indoor and outdoor use.
- High bonding strength.
- Precisely formulated for high flexural strength.
-
Multifunctional use for bonding ceramic tiles with the thin-layer method on concrete, brick, cement, and cement-lime plasters.
- Environmentally friendly.
Substrate Preparation: The substrate must be clean, solid, and free from greasy substances. Remove any formwork residues or oil paints and loose sand grains with a spatula or stiff brush. Highly absorbent substrates should be prepared with a deep-penetrating primer.
Application: For adhesive preparation: Pour 1 kg of powder into 0.22–0.24 liters of water (4.4–4.8 liters per 20 kg package) and mix well with a low-speed mixer until homogeneous. Let it stand for about 3 minutes and mix again. Use within about 3 hours. For adhesive application: Apply to the prepared substrate with a notched trowel. For outdoor tile installation, apply the adhesive in a continuous layer and also spread a thin layer on the underside of the tile to significantly improve bonding strength.
Storage: Store in dry conditions in the original packaging.
Specifications:
- Brand: Cekol
- Weight: 5 kg
- Application Tool: Notched trowel
- Adhesive Class: C1E
- Initial Bond Strength: ≥ 0.5 N/mm²
- Bonding after Thermal Aging: ≥ 0.5 N/mm²
- Bonding after Water Immersion: ≥ 0.5 N/mm²
- Bonding after Freeze-Thaw Cycles: ≥ 0.5 N/mm²
- Mixing Ratio: 0.22 to 0.24 liters of water per 1 kg of powder
- Tile Adjustment Time: 10 minutes
- Coverage: about 2.7 kg/m² with a 10 mm notched trowel
- Layer Thickness: 2 to 10 mm
- Application and Substrate Temperature: +5°C to +25°C
- Suitable for Walking and Installation: about 24 hours at 18°C
- Fire Impact Class: A1/A1fl
- Certificates: Hygiene Certificate
- Application: Tile adhesive
22 Coins
To earn Skroutz Coins, join Skroutz Plus and accept the terms of the reward program.