Impregnant is used for wood that, due to its sensitivity or location, requires chemical protection.

• Base color for all types of wood
• Protection against insects, cracks, and rusting
• Contains the most advanced biocides

Suitable for wood exposed to weather conditions and wood in damp areas. Wooden elements exposed to weather conditions (windows, doors, facade cladding, fences, sides) must be immediately protected from weather effects after applying Impregnant. The product is colorless, containing enough dye to easily monitor the areas of wood that have already been coated during application.

Warning: The use of coatings is not recommended for wood protection in bedrooms and other enclosed spaces where we spend extended periods, except for small surfaces such as windows and doors.

Instructions for Use: The wood must be dry, sanded, and clean. Shake the Impregnant well before use. It should not be diluted. Apply with a brush, roller, by dipping or pouring so that the wood is covered on all sides. Special attention should be given to protecting the cuts. It is important that the tool used is made of stainless material. The impregnated surface dries in 6–8 hours. The full drying time is longer at low temperatures and high humidity. The next coat can be applied once the Impregnant has fully dried, usually after 12 hours or after 24 hours at low temperatures. The application temperature should not be below 10º C.

Technical data:

• Composition: alkyd resins, biocides, additives, and water
• Coverage: 1 liter of impregnation covers 5–10 m² of wood per coat, depending on the type and treatment of the wood and the application method
• Full drying time: 6–8 hours, next coat after 12 hours (under normal conditions)
• Tool cleaning: with water and detergent
• Storage: in original packaging at temperatures between 5 and 30 °C

Do not let it freeze!

Available packages: 0.75 L and 2.5 L