Below are instructions for use for the best results:

1. Apply a thin layer of Dehydrator and wait for 1 minute until it dries (do not cure).
2. Apply a thin layer of Primer and wait for 1 minute until it dries (do not cure).
3. Continue with a thin layer of the base and cure.
4. Continue with a thin layer of the color of your choice and cure.
5. Repeat with another thin layer of the color and cure again.
6. If your nails break easily or are very thin, apply a layer of Reinforce Gel and cure.
7. Finish with the Top Coat of your choice by applying a regular layer and cure.

Curing times:

• UV Lamp 36W: 120 seconds
• LED Lamp 24W: 120 seconds
• LED Lamp 48W: 30 seconds

Removal:

1. Lightly file off the Top Coat from the nail surface.
2. Soak a small piece of cotton with pure acetone.
3. Place it on the nail and wrap with aluminum foil.
4. Wait for 5 minutes.
5. Remove the foil with the cotton and gently remove the polish using a cuticle pusher.

Precautions:

• Keep out of reach of children.
• Keep away from sunlight and heat.
• Tightly close the cap after use.
• Follow the instructions for use.
• Discontinue use if sensitivity occurs.