Skroutz.gr

Wilco Titanium Glass Floor Glass Electric Boiler 60lt 4kW
Electric Water Heaters

Wilco Titanium Glass Floor Glass Electric Boiler 60lt 4kW

The electric boiler from the company Wilco has a capacity of 60 liters and has a power of 4 kW.

In addition to heating water through electricity, it features an internal heat exchanger (coil) for...

The electric boiler from the company Wilco has a capacity of 60 liters and has a power of 4 kW.

In addition to heating water through electricity, it features an internal heat exchanger (coil) for connection to the central heating system, helping to produce hot water and reducing electricity usage.

Its capacity can meet the needs of two people, and the water...

See full description See full description
209 30 €
210 Coins 210 Coins
Delivery up to 31 days
20,00 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more
Delivery to your floor available
Do you want it with 15,00 € shipping?
From YDRO ARTAS
Άρτα, Άρτας
5+ pieces
See Water Heaters on the page of YDRO ARTAS
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come and pick it up (completely free of charge if you have Skroutz Plus) and refund your money.

Is delivery to a floor free?

Yes, we will carry it up to the floor for you, without any restrictions.

  • Extended warranty

    Mechanical or electrical failure of a component necessary for the device's operation/safe use - the same failures already covered by the original manufacturer's warranty, simply extending it by 1 year.

    • Valid for 3 more years
    • With the reliability of Allianz Partners
    Learn more
  • Installation: 85,00 €
You can select additional services after adding the product to the cart.
Product report

Description

Description

The electric boiler from the company Wilco has a capacity of 60 liters and has a power of 4 kW.

In addition to heating water through electricity, it features an internal heat exchanger (coil) for connection to the central heating system, helping to produce hot water and reducing electricity usage.

Its capacity can meet the needs of two people, and the water heats up in less than an hour. Typically, the most common size for an electric boiler is 80 liters.

The water storage tank has an internal enamel coating, providing protection against rust and ensuring clean water at all times.

It connects to the water supply, and for every amount of hot water drawn, there is automatic replenishment with cold water.

To reduce heat loss, it is advisable to install it close to the area of use. If installed inside the bathroom, safety measures and distances must be observed.

Maintenance every 1-2 years is necessary to prevent the accumulation of scale. Installing it in an attic or on the floor may make maintenance difficult.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Type
Electric Boiler
with Wi-Fi
No
Nominal Capacity
60 lt
Placement
Floor
Power
4 kW
Material
Glass
Height
71 cm
Width
42 cm
Length
42 cm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (4)

Reviews

2.3
4
2.3
Review this product
  1. 5 stars
    0
  2. 1
  3. 3 stars
    0
  4. 2
  5. 1
Review this product
  • Quiet
  • Hot water temperature
  • Water heating speed
  • Value for money
  • Construction quality
  • Michael_mavran
    1
    Michael_mavran
    This review is about nominal capacity: 120 lt, placement: Vertical

    Stay away, I have had it for 5 months in a closed basement space and it takes over an hour to heat the water, also when the water is hot it suddenly turns cold and it's finished, I will change the resistor and if not, it will be removed and thrown away.

    Translated from Greek ·
    Did you find this review helpful?
  • hellasplay
    2
    hellasplay
    This review is about nominal capacity: 80 lt, placement: Vertical

    attention, you see one thing and they send you another, mine came with a broken plastic lid which they said they would replace and it's been 1.5 years and they still haven't sent it, also it consumes a lot of electricity, for 60 degrees it needs 3 and a half hours in the winter even though it's indoors.

    Translated from Greek ·
    • Quiet
    • Water heating speed
    • Construction quality
    • Hot water temperature
    • Value for money
    Did you find this review helpful?
  • ababa641
    2
    2 out of 2 members found this review helpful
    ababa641
    This review is about the nominal capacity: 80 lt

    To have sufficient hot water, it needs to be on for 1 hour. It doesn't warn you when the hot water runs out; suddenly, in half a minute, it goes from hot to cold. As a boiler, it also didn't perform properly like a previous Elco I had for 20 years. There is no temperature indicator as shown in the picture. Also, several times the thermal switch would trip, resulting in the water heater not working, and I had to go up to the attic to reset the thermal switch. The installer told me he had seen the same problem with the thermal switch in other units as well.

    Translated from Greek ·
    Did you find this review helpful?
  • lioliosgiann
    4
    2 out of 2 members found this review helpful
    lioliosgiann
    This review is about nominal capacity: 100 lt, placement: Vertical

    Bought a month ago. Nighttime use. I turned it on at 5:30 in the morning. At 8:30 it was still on, heating the water to about 65 degrees (approximately, it doesn't have gradation). Consumption is 3 hours x 4 kilowatts = 12 kilowatts. The previous one (ELCO Glass) needed 45 minutes to 1 hour. Electric waste. Calculation of additional consumption over a 4-month period, using it every 3 days, is 40 x 8 = 320 kilowatts. I will monitor it and if it continues like this, I will change it back to the old one.
    Update. After monitoring, it takes about 1 hour to raise the temperature to 55 degrees.

    Translated from Greek ·
    • Hot water temperature
    • Quiet
    • Water heating speed
    • Value for money
    Did you find this review helpful?
  • Michael_mavran
    1
    Michael_mavran

    Stay away, I have had it for 5 months in a closed basement space and it takes over an hour to heat the water, also when the water is hot it suddenly turns cold and it's finished, I will change the resistor and if not, it will be removed and thrown away.

    Translated from Greek ·
    0
  • hellasplay
    2
    hellasplay

    attention, you see one thing and they send you another, mine came with a broken plastic lid which they said they would replace and it's been 1.5 years and they still haven't sent it, also it consumes a lot of electricity, for 60 degrees it needs 3 and a half hours in the winter even though it's indoors.

    Translated from Greek ·
    0
  • ababa641
    2
    ababa641

    To have sufficient hot water, it needs to be on for 1 hour. It doesn't warn you when the hot water runs out; suddenly, in half a minute, it goes from hot to cold. As a boiler, it also didn't perform properly like a previous Elco I had for 20 years. There is no temperature indicator as shown in the picture. Also, several times the thermal switch would trip, resulting in the water heater not working, and I had to go up to the attic to reset the thermal switch. The installer told me he had seen the same problem with the thermal switch in other units as well.

    Translated from Greek ·
    2
  • lioliosgiann
    4
    lioliosgiann

    Bought a month ago. Nighttime use. I turned it on at 5:30 in the morning. At 8:30 it was still on, heating the water to about 65 degrees (approximately, it doesn't have gradation). Consumption is 3 hours x 4 kilowatts = 12 kilowatts. The previous one (ELCO Glass) needed 45 minutes to 1 hour. Electric waste. Calculation of additional consumption over a 4-month period, using it every 3 days, is 40 x 8 = 320 kilowatts. I will monitor it and if it continues like this, I will change it back to the old one.
    Update. After monitoring, it takes about 1 hour to raise the temperature to 55 degrees.

    Translated from Greek ·
    2
  • See all
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

The electric boiler from the company Wilco has a capacity of 60 liters and has a power of 4 kW.

In addition to heating water through electricity, it features an internal heat exchanger (coil) for connection to the central heating system, helping to produce hot water and reducing electricity usage.

Its capacity can meet the needs of two people, and the water heats up in less than an hour. Typically, the most common size for an electric boiler is 80 liters.

The water storage tank has an internal enamel coating, providing protection against rust and ensuring clean water at all times.

It connects to the water supply, and for every amount of hot water drawn, there is automatic replenishment with cold water.

To reduce heat loss, it is advisable to install it close to the area of use. If installed inside the bathroom, safety measures and distances must be observed.

Maintenance every 1-2 years is necessary to prevent the accumulation of scale. Installing it in an attic or on the floor may make maintenance difficult.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Type
Electric Boiler
with Wi-Fi
No
Nominal Capacity
60 lt
Placement
Floor
Power
4 kW
Material
Glass
Height
71 cm
Width
42 cm
Length
42 cm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (4)

2.3
4
2.3
Review this product
  1. 5 stars
    0
  2. 1
  3. 3 stars
    0
  4. 2
  5. 1
Review this product
  • Quiet
  • Hot water temperature
  • Water heating speed
  • Value for money
  • Construction quality
  • Michael_mavran
    1
    Michael_mavran
    This review is about nominal capacity: 120 lt, placement: Vertical

    Stay away, I have had it for 5 months in a closed basement space and it takes over an hour to heat the water, also when the water is hot it suddenly turns cold and it's finished, I will change the resistor and if not, it will be removed and thrown away.

    Translated from Greek ·
    Did you find this review helpful?
  • hellasplay
    2
    hellasplay
    This review is about nominal capacity: 80 lt, placement: Vertical

    attention, you see one thing and they send you another, mine came with a broken plastic lid which they said they would replace and it's been 1.5 years and they still haven't sent it, also it consumes a lot of electricity, for 60 degrees it needs 3 and a half hours in the winter even though it's indoors.

    Translated from Greek ·
    • Quiet
    • Water heating speed
    • Construction quality
    • Hot water temperature
    • Value for money
    Did you find this review helpful?
  • ababa641
    2
    2 out of 2 members found this review helpful
    ababa641
    This review is about the nominal capacity: 80 lt

    To have sufficient hot water, it needs to be on for 1 hour. It doesn't warn you when the hot water runs out; suddenly, in half a minute, it goes from hot to cold. As a boiler, it also didn't perform properly like a previous Elco I had for 20 years. There is no temperature indicator as shown in the picture. Also, several times the thermal switch would trip, resulting in the water heater not working, and I had to go up to the attic to reset the thermal switch. The installer told me he had seen the same problem with the thermal switch in other units as well.

    Translated from Greek ·
    Did you find this review helpful?
  • lioliosgiann
    4
    2 out of 2 members found this review helpful
    lioliosgiann
    This review is about nominal capacity: 100 lt, placement: Vertical

    Bought a month ago. Nighttime use. I turned it on at 5:30 in the morning. At 8:30 it was still on, heating the water to about 65 degrees (approximately, it doesn't have gradation). Consumption is 3 hours x 4 kilowatts = 12 kilowatts. The previous one (ELCO Glass) needed 45 minutes to 1 hour. Electric waste. Calculation of additional consumption over a 4-month period, using it every 3 days, is 40 x 8 = 320 kilowatts. I will monitor it and if it continues like this, I will change it back to the old one.
    Update. After monitoring, it takes about 1 hour to raise the temperature to 55 degrees.

    Translated from Greek ·
    • Hot water temperature
    • Quiet
    • Water heating speed
    • Value for money
    Did you find this review helpful?
  • Michael_mavran
    1
    Michael_mavran

    Stay away, I have had it for 5 months in a closed basement space and it takes over an hour to heat the water, also when the water is hot it suddenly turns cold and it's finished, I will change the resistor and if not, it will be removed and thrown away.

    Translated from Greek ·
    0
  • hellasplay
    2
    hellasplay

    attention, you see one thing and they send you another, mine came with a broken plastic lid which they said they would replace and it's been 1.5 years and they still haven't sent it, also it consumes a lot of electricity, for 60 degrees it needs 3 and a half hours in the winter even though it's indoors.

    Translated from Greek ·
    0
  • ababa641
    2
    ababa641

    To have sufficient hot water, it needs to be on for 1 hour. It doesn't warn you when the hot water runs out; suddenly, in half a minute, it goes from hot to cold. As a boiler, it also didn't perform properly like a previous Elco I had for 20 years. There is no temperature indicator as shown in the picture. Also, several times the thermal switch would trip, resulting in the water heater not working, and I had to go up to the attic to reset the thermal switch. The installer told me he had seen the same problem with the thermal switch in other units as well.

    Translated from Greek ·
    2
  • lioliosgiann
    4
    lioliosgiann

    Bought a month ago. Nighttime use. I turned it on at 5:30 in the morning. At 8:30 it was still on, heating the water to about 65 degrees (approximately, it doesn't have gradation). Consumption is 3 hours x 4 kilowatts = 12 kilowatts. The previous one (ELCO Glass) needed 45 minutes to 1 hour. Electric waste. Calculation of additional consumption over a 4-month period, using it every 3 days, is 40 x 8 = 320 kilowatts. I will monitor it and if it continues like this, I will change it back to the old one.
    Update. After monitoring, it takes about 1 hour to raise the temperature to 55 degrees.

    Translated from Greek ·
    2
  • See all
209,30 €
20,00 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more
Delivery to your floor available